Created with Sketch. Created with Sketch.

Shop by Category

Meters ph ppm ec tds

  • By far the easiest and most economical solution for testing pH levels in soil. Simply inserting the HB-2 into the ground and waiting 3 minutes provides accurate soil pH readings. There’s no chemicals,batteries, or slurries involved. Also, the HB-2 can take relative soil moisture readings using a similar procedure.

    Soil PH Tester

    By far the easiest and most economical solution for testing pH levels in soil. Simply inserting the HB-2 into the ground and waiting 3 minutes provides accurate soil pH readings. There’s no chemicals,batteries, or slurries involved. Also, the HB-2...

    $75,46
    Add to Cart
  • Instantly read the gravity, in Brix, of unfermented wort of fruit juice – with just a few drops of liquid. This refractometer reads gravity by measuring the angle at which the light passes through the sample. Easier to use than a hydrometer, you only need a few drops for the sample.

    Refractometer

    Instantly read the gravity, in Brix, of unfermented wort of fruit juice – with just a few drops of liquid. This refractometer reads gravity by measuring the angle at which the light passes through the sample. Easier to use than a hydrometer, you...

    $41,52
    Add to Cart
  • HI 9813-5 is a pH/EC/TDS meter designed for simplicity of use in taking pH, mS/cm, ppm and temperature in the °C scale measurements.
Water-resistant portable meter with probe measures pH, EC, TDS, and temperature in centigrade for agricultural applications such as hydroponics, greenhouses, farming, and nurseries
Large LCD screen displays parameter being measured and calibration instructions
Dials located on front panel make calibration quick and simple, even for non-technical users
Multiparameter probe has an internal temperature sensor, 8-pin DIN connector, 1-meter/3.3 foot-cable, fiber junction, and gel electrolyte for harsh environments, such as fertilizer solutions
Accessories include one 20mL sachet each of pH 7.01 calibration solution, 1500 mg/L (ppm) calibration solution, 1413 μS/cm calibration solution, two 20mL sachets of electrode cleaning solution, 9V battery, and carrying case

    Hanna PH / PPM Monitor #HI-9813-5N

    HI 9813-5 is a pH/EC/TDS meter designed for simplicity of use in taking pH, mS/cm, ppm and temperature in the °C scale measurements. Water-resistant portable meter with probe measures pH, EC, TDS, and temperature in centigrade for...

    $234,77
    Add to Cart
  • The HI 9813-6N waterproof multiparameter meter measures pH, electroconductivity (EC), and total dissolved solids (TDS), making it suitable for designed specifically for agricultural applications such as hydroponics, greenhouses, farming and nurseries. The HI 9813-6N comes with a HI 1285-6 combination probe with DIN connector and 1 m/3.3 ft. cable, a starter set of calibration and cleaning solution sachets, a check solution sachet, a 9V battery and instructions. The attached HI 1285-6 polyprolylene probe features a fiber junction and gel electrolyte.

The meter has a calibration check function (Cal-Check) to validate instrument performance and an LCD screen. If the meter is calibrated, a message will indicate “Probe is OK,” but if the meter needs cleaning the device will direct the user to “Clean Probe and Calibrate.”

The HI 9813-6N tester functions in temperatures of 0.0 to 60.0 degrees C, and has a range of pH 0.0 to 14.0 (+ or - 0.1 pH) with a resolution of 0.1 pH. For EC, the device has a range of 0.00 to 4.00 mS/cm (+ or - 2% F.S. mS/cm) and a resolution of 0.01 mS/cm. For TDS, the device has a range of 0 to 1999 ppm (mg/L) (+ or - 2% F.S. ppm) and a resolution of 1 ppm (mg/L). Dimensions are 144.6 x 79.5 x 37 mm/5.7 x 3.1 x 1.5 inches (H x W x D) with a weight of 230 g (8.1 oz.). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)

pH meters and testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists in aquaculture, agricultural, wine-making and water-testing and for scientific applications.

Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) 9001 standards.

What’s in the Box?

HI 9813-6N meter
HI 1285-6 combination probe with DIN connector and 1 m/3.3 ft cable
HI 70007 pH 7.01 calibration solution (20 mL)
HI 70442 1500 ppm (mg/L) calibration solution (20 mL)
HI 70031 1413 µS/cm calibration solution (20 mL)
Two HI 700521 cleaning solution sachets (20 mL)
Carrying case
(1) 9V battery
Instructions

    Hanna PH / PPM Meter HI-9813-6N

    The HI 9813-6N waterproof multiparameter meter measures pH, electroconductivity (EC), and total dissolved solids (TDS), making it suitable for designed specifically for agricultural applications such as hydroponics, greenhouses, farming and nurseries...

    $291,39
    Add to Cart
  • HI-98107 (pHep®) is supplied complete with protective cap, calibration screwdriver, batteries and instructions. HI 98108 (pHep®+) is supplied complete with protective cap, calibration screwdriver, batteries and instructions.

    Hanna PPM DIST-1 HI-98301

    HI-98107 (pHep®) is supplied complete with protective cap, calibration screwdriver, batteries and instructions. HI 98108 (pHep®+) is supplied complete with protective cap, calibration screwdriver, batteries and instructions.

    $71,35
    Add to Cart
  • Designed for continuous monitoring of pH, TDS and temperature, the HI 981504 is easy to install and can be placed above the sample to be tested. pH, TDS and temperature measurements are simultaneously displayed on three backlit LCDs which can be easily viewed at a distance, even in low light. This means no more switching between parameters.

    Hanna Probe Grochek Tri Meter PH HI-1286

    Designed for continuous monitoring of pH, TDS and temperature, the HI 981504 is easy to install and can be placed above the sample to be tested. pH, TDS and temperature measurements are simultaneously displayed on three backlit LCDs which can be easily...

    $67,16
    Add to Cart
  • The HI-98129 offers the ability to measure conductivity, total dissolved solids (TDS), pH and temperature all in one compact pocket meter. The dual level display shows the pH or Cond/TDS reading together with the temperature of the solution. The meter itself is fully waterproof and even floats to aid retrieval.

    Hanna TDS-PH-EC-Temperature HI-98129

    The HI-98129 offers the ability to measure conductivity, total dissolved solids (TDS), pH and temperature all in one compact pocket meter. The dual level display shows the pH or Cond/TDS reading together with the temperature of the solution. The meter...

    $167,80
    Add to Cart
  • The HI73127 is a spare pH tester electrode that is compatible with:

HI98129, and HI98130 Combo multiparameter testers
HI98127 and HI98128 pHep® testers
HI98121 ORP tester
These meters also use HI73127 replaceable electrode that has a stainless steel round connector and extendable cloth junction. This cartridge design has no pins to line up or that can break.

    Hanna Probe PHEP4 & PHEP5 & Combo HI-73127

    The HI73127 is a spare pH tester electrode that is compatible with: HI98129, and HI98130 Combo multiparameter testers HI98127 and HI98128 pHep® testers HI98121 ORP tester These meters also use HI73127 replaceable electrode that has a...

    $67,16
    Add to Cart
  • The pH128 GroPro is a pH tester with advanced features for the measurement of pH in hydroponic nutrient solutions. The pH128 is a very simple meter to operate with all functions including turning on/off and calibration are performed with a single button. The pH128 features a replaceable HI1271 pH electrode that can be changed when needed without having to buy a new meter. The pH128 is supplied complete with a carrying case and calibration solutions.

One-Button Operation
Replaceable pH Electrode
±0.2 pH Accuracy

    Hanna GroLine pH Tester

    The pH128 GroPro is a pH tester with advanced features for the measurement of pH in hydroponic nutrient solutions. The pH128 is a very simple meter to operate with all functions including turning on/off and calibration are performed with a single button...

    $45,26
    Add to Cart
  • The pH value is displayed alongside the temperature of the solution, the LCD display also incorporates a battery life indicator and pH stability indicator as well as automatic shut off, automatic temperature compensation, automatic buffer recognition and automatic calibration.

    Hanna PPM DIST-5 Waterproof HI-98311

    The pH value is displayed alongside the temperature of the solution, the LCD display also incorporates a battery life indicator and pH stability indicator as well as automatic shut off, automatic temperature compensation, automatic buffer recognition and...

    $125,90
    Add to Cart